60mm Elastic Filler

60mm Three-dimensional Elastic Filler For Aerobic And Anaerobic Tank

Product Description

HUISEN Elastic Filler choose good material which is resistant to corrosion, temperature and aging and use special craftsmanship to insert and fix the plastic silk on the central rope, so it has corrosion resistance and high strength. Due to the excellent material selection and craftsmanship, the wire is rigid and soft, which makes the elastic filler uniform arrangement and radiation. The filler can be evenly spread in all directions in the effective area, so that the air, water and biofilm can be fully infiltrated and contact exchanged. The biofilm can not only be evenly implanted on each filament, maintain good activity and space variability, but also obtain more and more specific surface area in the operation process, and can be carried out Good metabolism.

In the operation the gas is driven by three - dimensional flow of sewage, colliding with each other and being continuously cut by the spiral net to form microbubbles, that increase the utilization of oxygen and reduce the air.At the same time, the biofilm can have a good metabolism effect not adhesion.

* Strong bubble cutting ability;

* Large space volume utilization;

* Non blind-aera, difficult to plug;

* Easy to assemble, no need to use rope network to intercept and divide the pool body, just need fix the up and down grille.

Working Principle

1m3 elastic filler contains 44meter valid length, when customer purchase, should tell us the length of the frame, such as 1m, 1.5m, 2m, so that we can cut the elastic filler to this length and leave enough invalid length to tie the filler on the frame.

When elastic filler is fixed on the frame, and put into waste water, after few days, biofilm will incur and start to treat the waste water by using microorganism.

Three dimensional Elastic Filler

Wastewater Treatment Elastic Filler

60mm Elastic Filler Images